Why Does My iPhone Screen Go Black

Solution : Get iPhone Screen Repair Service

iPhone Screen Goes Black During Call in iOS 14/13.6 – Here’s the Fix

If your iPhone screen turns black after screen replacement or after the phone has been dropped/ water-damaged, the black screen of death is probably caused by hardware damage, especially when the iPhone screen is black but the phone is still on.

If you fail to fix iPhone black screen with the above methods or iPhone screen went black but the phone still works, you should get iPhone screen repair service from the local store. If your iPhone is still under warranty or under AppleCare plan, take the phone to local Apple store to get help.

How To Fix iPhone Black Screen

Since there are different potential causes to have an iPhone stuck on a black screen, there are also different potential solutions to the issue. Fortunately most of the time the black iPhone screen is the result of some software issue that is easily resolved, so with that in mind well start from the easiest troubleshooting methods first.

If you want a short overview of the troubleshooting material, try the following:

Plug the iPhone into a wall charger, then reboot the iPhone
Update apps on the iPhone
Update iOS on the iPhone
Take the iPhone to an authorized Apple repair center if all else fails

Thats a very brief summary, but read on below to learn much more.

Reset All Saved Settings

If none of the above-mentioned solutions would seem to work, then you might need to take some added measures to fix iPhone camera not working black screen. If there is a problem with the phoneâs settings, then you have to reset all the saved settings. To do this, unlock your device and go to its Settings > General > Reset and tap on the option of âReset All Settingsâ. Now, confirm your choice by providing the passcode of the device.

Wait for a while as the iPhone would be restarted with default settings. Now, you can launch the camera app and check if the iPhone camera black is still there or not.

You May Like: How To Reset Carrier Settings On iPhone

Tip 4 Hard Reset iPhone X To Fix Screen Going Black During Calls

Sometimes, that iPhone X screen stays black during call can be resulted from malfunctioning sensor or iPhone stuck on black screen. If this happens, you can perform hard reset to adjust the sensor and get iPhone X out of black screen stuck.

Press and quickly release Volume Up button
Press and quickly release Volume Down button
Press and hold Side button until you see the Apple logo appears. Then your iPhone will boot up.

Experiencing This iPhone Black Screen Bug Randomly

Easiest Fix for (iPhone, iPod, iPad) Black Screen

If you can access your iPhone at times, troubleshoot with these tips:

Sometimes enabling Siri fixes this problem. If Siri is disabled, go to Settings > Siri & Search and turn Siri on
Change the Date on your iPhone. Tap on Settings > General > Date & Time. Disable the Set Automatically feature and manually set up a time for a date that was in the past. Then, restart your device. Once the reboot issue is resolved, change your date and time settings back to Set Automatically.
Change Display Zoom View from Standard to ZoomedorZoomed to Standard depending on your original setting
If the tip above did not solve this problem, try this: Tap Display Zoom View and choose Zoomed and tap Set.
A message will say Changing Display Doom will restart iPhone and tap Use Zoomed. After your iPhone restarts, now tap Standard > Set and Use Standard.

Reset your iDevices settings. Go to Settings > General > Reset > Reset All Settings.

This reset does not impact ANY data but does return to defaults things like your accessibility settings, wallpapers, and removes any stored WiFi passwords

Tap Settings > Accessibility > Display & Text Size then disable Auto-Brightness

Restart your device by pressing and holding the on/off button.

Remove and reinstall any app that you are having problems with

Tap and hold the app, then tap the sign when it jiggles. Then go to the App Store and re-download the same app

Or use Settings > General > Storage and delete or offload apps from there

Also Check: Mirror iPhone To Samsung Tv Wireless

Lets Take A Look Inside Your iPhone

iPhone Logic Board

A brief tour of the inside of your iPhone will help you understand why your screen is black. There are two pieces of hardware that well talk about: Your iPhones display and the logic board.

The logic board is the brains behind the operation of your iPhone, and every part of your iPhone connects to it. The display shows you the images you see, but the logic board tells it what to display.

Removing iPhone Display

The entire display of your iPhone is removable, but its a lot more complicated than you might think! There are four major components built into your iPhones display:

The LCD screen, which displays the images you see on your iPhone.

The digitizer, which is the part of the display that processes touch. It digitizes your finger, which means it turns the touch of your finger into a digital language your iPhone can understand.

The front-facing camera.

The Home button.

Each component of your iPhones display has a connector that plugs into your iPhones logic board. Thats why you might be able to swipe across the screen with your finger, even though the screen is black. The digitizer is working, but the LCD is not.

The black stick is touching the display data connector

There are other cases where the fix isnt so simple, and thats when the LCD itself is damaged. When that happens, it doesnt matter if the LCD is connected to the logic board or not its broken and it needs to be replaced.

Top 7 Ways To Solve iPhone Screen Goes Black During Call

iPhone Issues

3 min read

Many users have reported that their iPhone screen goes black during call. It would not light up until the other person disconnects the call, which prevents the iPhone users from accessing the speakerphone, keypad and other buttons on their screen.

This issue is very common and can be caused by various reasons. One of them would be the proximity sensor that is located near the earpiece.

If you are facing the same problem on iPhone, this guide would be really helpful for you as it contains tops 7 ways to fix this issue.

Phase 2. Top 7 Ways to Solve iPhone Screen Goes Black During Call

Also Check: Can I Screen Mirror iPhone To Samsung Tv

Solution : Hard Reset To Fix iPhone Black Screen Of Death

When your iPhone/iPad has a black screen and unresponsive, you can hard reset the iPhone to troubleshoot black screen.

Step 1 Press and hold the “Sleep/Wake” and the “Home” key for about ten seconds.

Step 2 Wait until the Apple logo appears on the screen.

Step 3 After the iPhone reboots, it should get rid of the black screen of death.

Reset iPhone in Black Screen Without Home Button

Since iPhone 7/8/X has no home button, to reset iPhone 7/8/X/11 with a black screen, you should use different buttons.

To force restart an iPhone 7/7 Plus in dark screen, press and hold Sleep/Wake + Volume Down keys.
If it is an iPhone 8/X that goes black, press and release the Volume Up button, then press Volume Down button and release, finally press and hold the Sleep/Wake button until the iPhone boots up.

1. If the slider occurs, slide it to turn it off and then restart the phone again.
2. If the phone battery is empty, the iPhone screen is black because it runs out o battery. Therefore, connect your device to power.

If the iPhone keeps blacking out after the hard reset, keep reading to fix the iPhone 5/6/7/8/X black screen of death with solution 2.

Fourth Solution: Perform A Dfu Restore

How To Fix iPhone Screen Goes Black During Any Call !! Fix iPhone Proximity sensor Not Working

If your iPhone is still stuck on black screen of death after performing the recovery mode restore, the DFU or Device Firmware Upgrade mode restore can be considered as a last resort. It is the deepest type of system restore done on an iPhone and is often used to deal with fatal system errors that caused your device to malfunction. Prior to performing this procedure, verify and ensure your device has not obtained some sort of physical damage or liquid damage.. Performing a DFU mode restore on physically damaged phones may result in a bricked or totally dysfunctional iPhone. Should you wish to continue at your own discretion, you may refer to the following procedures to carry out a DFU mode restore on your iPhone:

Close all running apps in your computer to make sure that DFU mode restore process will not be interrupted.

Connect your iPhone to your computer using the Apple-supplied USB or lightning cable.

While your phone is connected, press and hold the Power/Side button for about 3 seconds.

Keep pressing the Power/Side button, then press and hold the Volume Down button for 10 seconds. If the Apple logo appears, it means that you have held the buttons too long and youll have to start all over again.

If you see no logo, release the Power/Side button but keep on pressing the Volume Down button for another 5 seconds.

If you see the Plug into iTunes screen, it means you have not entered DFU mode successfully and so youll have to start all over again.

Don’t Miss: Can I Screen Mirror iPhone To Samsung Tv

Tip 6 Efficient And Time

If all the basic troubleshooting tips above failed to fix iPhone XS screen goes black during calls, there might be something wrong with the iOS system. A professional iOS system recovery tool, UltFone iOS System Repair, is highly recommended to fix all kinds of iOS stuck, like iPhone stuck in black screen/fix recovery mode loop/DFU mode/Apple logo without losing data.

Lets Dig Deeper To Fix Your iPhone Black Screen

Rogue apps and bad updates are usually emerging among the main culprits. Thus if your iPhone started to get stuck on black screen after installing a new app, try to disable or delete the suspected app to see what happens. If it occurs after installing an update, then try to delete the update or revert to the previous software version. Performing these subsequent solutions may also offer temporary, if not permanent remedies.

Before we proceed, if youre looking for a solution to a problem with your phone, try to browse through our iPhone Help Guides page to see if we support your device. If your phone is in the list of our supported devices, then go to the troubleshooting page and look for similar problems. Feel free to use our solutions and workarounds.

Also Check: Degree Symbol Ios Keyboard

How Do I Know Whether My Display Is Dislodged Or Broken

Im hesitant to write this because it is by no means a hard and fast rule, but I have noticed a pattern in my experience working with iPhones. There are no guarantees, but my rule of thumb is this:

If your iPhone display stopped working after you dropped it, your screen is probably black because the LCD cable has become dislodged from the logic board.
If your iPhone display stopped working after it got wet, your screen is probably black because the LCD is broken and needs to be replaced.

Disable The Reduce Motion

Why Does My Screen Go Black On My iPhone 6s

Motion effects of iOS can create the perception of depth on the Home screen and also within apps. But it will bring more burden to your iPhone, causing problems like iPhone screen not responding while on a call. You can use Reduce Motion to turn off these effects and save your iPhone. Follow the steps below.

Step 1. First of all, click the Settings of your iPhone.Step 2. Click the General button and Accessibility button.Step 3. Find out the Reduce Motion switch and turn it off.

You May Like: 8 Ball In Imessage

Fourth Solution: Dfu Mode Restore Your iPhone Xr Thats Stuck On Black Screen

If the issue still persists up to this point, DFU mode restore is deemed to be your last resort in fixing the problem on your end. This option will restore your phone to its factory default settings even without the boot loader being activated. Being said, you need to back up your saved files to either iTunes or iCloud beforehand, if possible. Connect your iPhone XR to the computer using the supplied USB or lightning cable and then follow these steps:

Quickly press and release the Volume Up button.

Quickly press and release the Volume Down button.

Press and hold the Side/Power button and wait until the screen goes black.

Once the screen turns black, continue holding down the Side/Power button and then press and hold the Volume Down button for at least 5 seconds.

Then release the Side or Power button but continue holding the Volume Down button for another 5 seconds.

After the elapsed time, iTunes will recognize your iPhone XR device. When it does, release the Volume Down button.

Then follow the onscreen instructions to initiate the restoration of your iPhone XR device. If your phone has been successfully restored, it will automatically exit from DFU mode and you will be prompted with the initial activation screen. Otherwise, exit DFU mode by doing a forced restart. Please see steps on the second solution to initiate a forced restart on your device. Then proceed to set up your iPhone XR as new again.

Way : Restore iPhone To Factory Settings

In most cases, an iOS system repair tool helps successfully fix the iPhone screen going black randomly caused by software problems. But if you dont want to use any third-party tools, then the last resort you can try is to restore your iPhone to its factory settings using recovery mode. This will delete all data, apps, and settings on the iPhone. So, back up your iPhone first. Then follow these steps to restore your iPhone to factory settings.

1. Connect the iPhone to a PC or Mac with the latest version of iTunes installed, and then launch iTunes.

2. While the iPhone is connected, force restart the iPhone to get into the recovery mode.

3. iTunes will pop up a dialog box that allows you to update or restore the iPhone. Click Restore to restore the iPhone.

Tips: Many times, restoring the iPhone helps fix software-related problems. But sometimes restore can fail. If so, iSumsoft iOS Refixer is still the best way to solve the problem that iPhone screen goes black randomly.

Recommended Reading: Can I Screen Mirror iPhone To Samsung Tv

Put iPhone/ipad In Recovery Mode Without Home Button

The Home button on your iPhone is an important one. Until the release of the iPhone 7, it seems it is very little you can do on the iPhone without involving the home button. Therefore, we all agree that the home button is important. However, what happens when you drop the device and the home button gets damaged and cracked? What should you do when you can’t use the home button and you need to put the device in recovery mode? Every method to put your device in recovery mode requires holding down the home button. Is there a way to do it without a home button? In the part, we will show you how to make it. This way you can fix whatever issue your device is facing even if the home button is not working.

Free Tool To Put Your Device In Recovery Mode Without Home Button

My iPhone Screen Is Black! Here’s Why & The Fix.

In this case, iMyFone Fixppo is also the best choice for you because it can get your device including iPhone/iPad/iPod touch in recovery mode without using the Home button. Begin by downloading Fixppo application for Windows or Mac and install it. Follow these simple steps to get your device in recovery mode using Fixppo.

Step 1. Launch Fixppo on your computer and choose Enter/Exit Recovery Mode on the home page. Then connect the device and click the Next button. The program will detect the device.

Step 2. Now, all you have to do is click “Enter Recovery Mode” and the device will be put in recovery mode.

If you would rather not use a third-party tool to put the device in recovery mode, you have to replace the home button first before putting the device in recovery mode.

Now you get three methods to fix iPhone black screen of death. Which one is the most useful for you? Just feel free to try Fixppo and leave a comment.

Why Is Screen Black On My iPhone 6/7/8/x/11/12

There are mainly two kinds of reasons why your iPhone screen is black and won’t turn on. Firstly, your iPhone could have black screen of death because of a hardware problem, for example, your phone screen is broken or damaged after the device is dropped or water damaged.

Also, the iPhone black screen of death could be caused by a software problem, for example, a software crash can freeze your iPhone screen and make it turn black.

If black screen of death on your iPhone is a result of hardware damage, you should take the phone to Apple Store. But if it is software-related, here are 4 solutions to fix black screen on iPhone 5/6/7/8/X in iOS 11.4 or earlier.

Best Solution To Fix iPhone Black Screen Of Death

None of these options work for you? Don’t worry. To fix a black screen on iPhone 5/5s/5c/6/7/8/X/XR/XS/11/12, there is the best method you can adapt. iOS System Recovery, a professional iPhone manager, can fix iPhone black screen easily with the “Fix iOS to normal” function. Read on and find out how to get iPhone out of black screen, firstly, download and run this software on your PC/Mac.

Step 1Choose “iOS System Recovery”

After you launch the program, connect iOS device to the computer via USB cable. Click “iOS System Recovery” from the main interface.

Step 2Enter recovery mode/DFU mode

FoneLab will recognize the “iPhone screen is black” situation automatically. You’ll be lead into Recovery Mode/DFU mode.

Step 3

Mistaken firmware problem result in your iPhone black screen. You should download firmware to repair the iOS system. You can hit the “Repair” button to download the repaired plug-in and restore iPhone.

Step 4Restore iPhone with black screen

For minutes, the downloading process will be done. FoneLab will continue to repair your iPhone screen being black. About 5 to 10 minutes, your iPhone will exit the black screen. FoneLab will fix your iOS device to normal.

Not only could you fix iPhone black screen issue, FoneLab can also recognize and fix other iPhone issues including iPhone won’t turn on, iPhone frozen and more.

You can learn the steps to fix iPhone black screen from the video below:

Don’t Miss: Delete Hidden Apps On iPhone