Monday, October 25, 2021

How To Get iPhone Off Silent Mode

Must read

Using The Ring/silent Switch

How to Change an iPhone From Silent Mode to Loud : Tech Yeah!

The Ring/Silent switch is above the volume buttons on the left side of your iPhone. You’ll be able to find the switch here on all iPhones as the position has never changed.

To silence your iPhone, flick the switch toward the back of the iPhone. You’ll be able to tell when you’ve done this as the switch will show an orange indicator.

Once you’ve done this, you’ll also see a notification showing that your iPhone is in silent mode on the display.

If you want to un-silence your iPhone, do the same thing in reverse. Flick the switch towards the front of the iPhone and you’ll receive a confirmation on the screen showing that silent mode is off.

Ways To Turn Off Silent Mode On Your iPhone When The Button Is Broken

Ever since the launch of the iPhone, the Ring/Silent switch is persistent on all the iPhones launched to date. The silent mode button is a physical toggle switch that sits above the volume buttons on the left side of the iPhone. Silent Mode basically mutes your iPhone by turning off ringtones and alerts for incoming calls, messages, and notifications to avoid distraction.

Unlike most smartphones, there is only a hardware button to control and silent calls/camera sound on the iPhone. While a dedicated mute key makes it easy to switch between ring and silent mode, it can be troublesome too. For instance, when the silent switch is not working for some reason or you have a broken silent button. Or when you are using a case that makes it hard to flip the mute button. In such scenarios, it is nearly impossible to get your iPhone out of silent mode unless you get it repaired.

A simple solution to this limitation could be an addition of a silent/vibrate mode shortcut somewhere in the Control Center. Unfortunately, no such option exists until now. Whats more surprising is that there is no way to find out if your iPhone is in silent mode or not. To check this, you explicitly need to check the position of the mute button,;either visually or using finger touch.

Faqs Of iPhone Stuck On Silent Mode

Why is iPhone stuck on silent mode?

Perhaps the mute button or switch on iPhone isnt working. You can go to Settings and enter Sounds & Haptics to adjust the volume and vibrate.

Why is my iPhone silent when locked?

Mostly, iPhone doesnt ring for incoming calls and notifications when Do Not Disturb option is turned on. When you choose While iPhone is Locked option, it will silence incoming calls, alerts and notifications.

How to fix iPhone stuck in recovery mode?

If your iPhone is stuck in Recovery Mode, you can use Aiseesoft iOS System Recovery to fix it. Enter iOS System Recovery window, and click Start button to confirm iPhone stuck in recovery mode. Then click the Repair button to start download the plug-in and get iPhone out of recover mode.

Read Also: Where Is The Sim Card On iPhone Xr

Reason 4 Obsolete Ios Version

You might have heard this advice but it is worth repeating again that you should always keep the iOS version up to date on your iPhone. There are many reasons why you need to do this. The issue you are currently facing on your phone could be the result of a bug in your current iOS version.

New iOS updates often patch existing bugs and let you have an enhanced and bug-free experience. If your iPhone is running a really old version of the iOS operating system, it is high time that you get it updated to the latest version available.

Updating your iPhone is as easy as tapping a few options.

What Is iPhone Silent Mode

Viewing a thread

iPhone silent mode is a very convenient feature that can help you quickly and easily turn the ringer off and set your iPhone a vibrate-only mode. As it mentioned above, there is a ring/silent switch designed on every new iOS devices. The toggle switch sits above the volume buttons on the left edge. You can easily switch it to set your iPhone into ring or mute mode. When your iPhone is in silent mode, the ringer will be muted and only vibrate is on.

If you dont like the vibrate in silent mode, you can go to Settings app. Here you can choose the Sounds option and then toggle off Vibrate on Silent.

Don’t Miss: How To Edit Featured Photos On iPhone

Why Are My Calls Being Silenced On My iPhone

If youre suddenly not receiving call notifications and dont know why, check the switch that controls Ring and Silent Mode; it could be set to Silent Mode by mistake.

You may also want to double-check that you didn’t mistakenly activate the Do Not Disturb button in your Control Center.

Other possible reasons for call silencing could include:

  • Your bedtime and sleep mode settings: If you use the Bedtime feature on iOS 13 and earlier, check to see if Do Not Disturb During Bedtime is on from the Clock app >Bedtime>Options. From the Health app in iOS 14, choose Browse>Sleep>Options>Sleep Mode and look at the toggle next to Turn On Automatically.
  • Your headphones could be the culprit: Open the control center to see if the volume bar is too low or mistakenly muted. If you see a Headphones volume indicator on your screen, even if you disconnect the accessory, your iPhone could be stuck in headphone mode and require an inspection by Apple Support.
  • Your device could be blocking unknown callers: Go to Settings>Phone>Silence Unknown Callers and move the toggle to the off position if its activated.;

Fix : Check The Silent Button On Your iPhone

Before you take any drastic measures, make sure that the silent button is not broken on your iPhone. You can find the Ringer/Silent switch on the side of your device. First, check if your iPhone silent button is stuck and clean any dirt or debris from it. If the button is broken, then you can visit the service center to get it fixed.

Apart from that, make sure that the silent button is placed correctly. To put your phone in silent mode, you need to slide the button down so that the orange line would be visible on the side.

Don’t Miss: How Much Is The iPhone 12 Going To Be

Fix : Set Up A Silent Ringtone

You might already know that there are different ways to set up ringtones on our device. Even if the silent button is broken on your iPhone, you can set a silent ringtone to get the same effect.

Simply unlock your iPhone and go to its Settings > Sounds & Haptics > Ringtones. Now, go to the Tone Store from here, look for a silent ringtone, and set it as a default ringtone on your phone.

Fix : Use The Assistive Touch To Enable Silent Mode

How to Turn off Silent mode on iPhone 11 (Mute Switch)

In case the iPhone silent button is stuck or broken, you can use the Assistive Touch feature of your device. It will provide different shortcuts on the screen that you can access. At first, just go to your phoneâs Settings > Accessibility and make sure the âAssistive Touchâ feature is turned on.

Now, you can find a circular floating option on the screen for the Assistive Touch. If your iPhoneâs silent switch is not working, tap on the Assistive Touch option and go to the Device features. From here, you can tap on the âMuteâ button to put your device in silent mode.

You can later follow the same process and tap on the icon to un-mute your device . In case the iPhone silent switch is not working, then the Assistive Touch would be a substitute for it.

Read Also: How To Transfer Photos From Windows To iPhone

How To Mute & Turn Off All Sound On iPhone

Every iPhone that has been released to this very date features a physical mute switch on its left side. This is the quickest way to silence all phone calls and sound alerts on your device. However, that doesnt turn off sound during music or video playback, in all apps anyway.

  • To put your iPhone into silent mode, simply push the physical mute switch to the left side. You should be able to see the orange indicator when youve muted your iPhone, as shown below.
  • Next, to turn off sound during music or video playback, hold the volume down button located on the left side of the device. Your iPhone will now display the volume bar to indicate the current volume level.
  • Now, if the physical volume buttons on your iPhone are broken or not functioning properly, you use the volume slider in the iOS Control Center to adjust the volume level for media.
  • If the hardware mute switch on your iPhone is damaged or not working properly, you can adjust ringer volume by heading over to Settings -> Sound & Haptics.
  • To put your device in Silent mode, move the slider for Ringer and Alerts all the way to the left. Here, you can also disable vibrations while youre in Silent mode using the toggle right above the slider, as shown below.
  • These are pretty much all the necessary steps you need to follow, and you should now have a completely mute iPhone, silent as can be.

    What About Turning Off Vibrate

    It’s all well and good turning your iPhone’s ringer off, but sometimes the vibrations are just as much of a problem. If your iPhone is on a table, the vibration alerts can sometimes make just as much noise as the ringer. So you might want to turn off vibrate on your iPhone as well.

    Doing this is really easy:

  • Just head into the Settings app.
  • Tap Sounds & Haptics, which is near the top of the app.
  • Once on this page, turn off the toggle for Vibrate on Silent.
  • This will stop your iPhone from vibrating at all when it’s in silent mode.

    Image Gallery

    You can turn off vibrations for when your iPhone ringer is on too. You just need to turn off the toggle for Vibrate on Ring. This will stop your iPhone from vibrating at the same time it makes the notification sound.

    You can come back to change these settings as often as you need to. If you just want to turn off vibrations for a short while and then have them back on again, this is absolutely not a problem.

    Recommended Reading: Why Does iPhone Battery Drain So Fast

    Adjust The Sound Settings

    Its possible you accidentally turned off the sound through your phones buttons. You can prevent this from happening again by adjusting the sound settings.

    Heres how to do it:

  • Head to Settings.
  • Select Sounds & Haptics .
  • Find the Ringer and Alerts section.;
  • Under the Ringer and Alerts section, toggle off the Change with Buttons.
  • With these settings, the volume of the ringer and alerts will no longer be affected by the volume buttons. You will be alerted when there are calls or messages.

    Switch Silent Mode For Ios

    How to Set iPhone On Silent Mode Except For Selected Group ...

    Learn in 1.5 minutes how to turn silent mode off on your iPhone or iPad while screen mirroring. Enjoy everything including your apps with sound today!

    Some apps dont play audio on TV when the silent mode is turned ON on your iPhone or iPad. To stream audio from these specific apps from your phone or tablet, you need to turn silent mode OFF. The guide below helps you with this.

    MirrorMeisters screen mirroring app is available for all iOS and macOS devices. It allows you to enjoy anything on your TV from an Apple device. Think of videos, photos, breaking news, sport, livestreams and whatnot. And our screen mirror app doesnt work on just one TV brand. No! It works on all TVs.

    Also Check: How To Recover Deleted Imessages On iPhone 7

    Disable Silence Unknown Callers

    Silence Unknown Callers is a feature that lets you block phone calls from unsaved contacts. Thats unless youve texted them before or theyve sent their number to your email. Its a clever feature. But it can be the reason youre missing calls.

    Disabling the Silence Unknown Callers feature doesnt directly fix iPhone that keeps switching to silent mode. But it will help prevent any missed calls.

    Heres how to turn Silence Unknown Callers off:

  • On your iPhone, navigate to Settings.
  • Select Phone.
  • If the button beside Silence Unknown Callers is green and active, toggle it off.
  • Using The Volume Buttons

    While you can’t use the volume buttons to completely silence your iPhone ringer, you can silence other sounds.

    When you’re in applications that are playing sound or consuming media on your device, you’ll be able to use the volume buttons to turn the sound down all the way to silence. The bottom button is volume down and the top button is volume up.

    One example of how you can use the volume buttons is to turn off the camera shutter sound in the Camera app.

    You can also use the volume buttons to turn down your ringer to the lowest level of noise using the volume buttons. It’s the same process, but make sure you’re not trying to do this while other sounds are playing.

    If other sounds are playing, just quickly go to the Home Screen to adjust the ringer volume.

    Also Check: How To Create Side By Side Photos iPhone

    Activating Vibrate Mode In iPhone iPhone Vibrate Mode

    If you are like me and like to put your phone in vibrate mode then these steps are for you. iPhone had a ringer mode switch but it either activates ring mode or silent mode. So the switch is useless if you want to active

  • Unlock iPhone and open setting and Navigate to the below path
  • Settings Sounds & Haptics.;Phone earlier to iPhone 7 models can find the option at Settings Sounds.
  • Here you will find the option to activate iPhone to vibrate in both Ring or Silent mode. You can off both options if you dont want vibration mode in the iPhone.
  • How Do I Unsilence Calls

    How To Turn Off Silent Mode On Apple iPhone 6S – Turn Silent Mode Off! Switch iPhone 6S

    Another way to ensure you notice incoming calls is to turn off Silent Mode and check your ringer volume.

  • Move the switch on the left side of your iPhone toward you so that the orange disappears. Also, look for a notification on your display that says Silent Mode Off.

    If you turn on Change with Buttons under Sounds & Haptics>Ringer And Alerts, a ringer volume bar indicator appears on your display instead.

  • To manage the sounds that signal calls and other alerts when Silent Mode is off, go to Settings>Sounds & Haptics.

    On models older than iPhone 7, this menu is called Sounds.

  • Under Vibrate, turn on Vibrate on Ring if preferred.

  • Also, ensure that the volume slider under Ringer And Alerts isnt positioned all the way to the left .

    If you dont see notifications for missed calls, ensure you have notifications enabled from;Settings>Phone>Notifications>Allow Notifications.

  • Also Check: How To Backup Disabled iPhone

    Ways To Turn Silent Mode Off On Ios

    1 | Using the ring / silent switch on the left side of the device

    All iPhones and some iPads have a ring or silent switch on the left side of the device . Move the switch so that orange detail isnt showing.;

    Use the ring mode to stream audio.

    2 | Use the Control Center

    If you face one of the situations below, use the control center to turn silent mode OFF.

    Your device doesnt have the ring / silent switch on the device.

    Your device is configured to use the silent/ring switch for orientation lock.

    In this case, use the control center to turn mute OFF: on your iPhone/iPad drag from the top or bottom to open the control center. Make sure that the ringer icon has white color as shown in the image below.

    Use the control center to turn silent mode OFF.

    Using Back Tap In Ios 14

    In iOS 14 and later, you can use the Back Tap functionality to take a screenshot, lock the screen, open the Control Center, toggle Mute, open a Shortcut, and more.

    Heres how you can assign a silent mode shortcut to toggle the silent mode on or off by simply tapping the back of your iPhone.

  • Go to Settings > Accessibility > Touch.
  • Scroll down to the bottom and select Back Tap.
  • Tap on Double Tap and select Mute under the System category. You can also assign the action to the triple-tap gesture.
  • Double-tap firmly on the back of your iPhone to turn on or off the silent mode.
  • NOTE: The Back Tap feature only works when the device is in an unlocked state.

    You May Like: How To Add Email iPhone

    How To Put The iPhone On Silent Or Vibrate

    Both the iPhone 4 and iPhone 4S, like many other cell phones, offer ways to silence your phone using vibrate and silent modes. As a business owner, knowing how to set these modes on your iPhone enables you to practice proper business etiquette. For example, when you are in a meeting with a client, it is best to set your phone to silent mode to show your client you are giving him your full attention. There are three different silent and vibration modes for your iPhone: silent, silent/vibrate and vibrate.

    How Can I Find My Phone When Its On Silent

    How to Turn Off the iPhone Ringer

    How to Locate a Missing Android Phone When in Silent Mode.

    • Head over to Googles android device manager www.google.com/android/devicemanager in your desktop browser. Make sure to login with the same Google account that is associated with your android phone.
    • You will now see a list of all devices which you have used with this account.
    • Your device will now start ringing.

    Recommended Reading: How To Get Old Texts On iPhone

    More articles

    Popular Articles