How To Calibrate iPhone Compass

iPhone Compass Not Working Showing Wrong Directions Fix

Several users have reported that The iPhone Compass app is not working properly. These are common users reported problems:

• Compass freezes or points in the wrong direction.
• Compass is behaving strangely.
• Compass is unable to find the location or elevation data.

This article explains how you can fix when Compass is not working properly.

Compass is a very useful app. Using Compass, your iPhone can be used for finding direction and location.

• See also

The Real iPhone Compass Calibration Tutorial

• How To Calibrate iPhone Compass Instantly
• How to enable or disable Compass Calibration on iPhone 6
• Calibrate the compass on your iPhone
• How to repair iPhone 6 6Plus Compass Auto Undo Typing Rotate problem tutorial
• iPhone Compass not working problem solution | iPhone 6/6s | IOS 11
• How to use the iPhone Compass!!

How To Use The Compass App On Your iPhone

The Compass app on iPhone is especially helpful for when you’re trying to find directions, elevation, coordinates, and what direction north is in.

However, some critics have noted that the Compass app isn’t always accurate. According to Apple, even the slightest magnetic interference can “cause a deviation.”

But overall, the app is useful for figuring out if you’re staying on the right course on a hike, for example, or want to know which direction west is once you’ve exited an underground subway station.

To use the compass to stay on track, tap the compass dial to mark your current direction. Once you start moving, the red line will signify how far off course you’ve gone.

Once you’ve opened the Compass app and calibrated it, you’ll see a series of numbers near the bottom of the screen. The first set of numbers the degrees. There are 360 degrees on the compass, 0 being north, 90 being east, 180 being south, and 270 being west.

The second set of numbers are your coordinates where you are pertaining to Earth’s latitude and longitude lines. You can use these coordinates to give the very specific location of where you are. And if you tap the coordinates, Apple Maps will open and show you where you are on a map.

The last two lines will tell you where you geographically are and at what elevation.

Also Check: How Do I Get My Pictures Back On My iPhone

How To Calibrate The Compass On Android To Improve Device Location Accuracy

Ben Stockton is a freelance tech writer from the United Kingdom. In a past life, he was a UK college lecturer, training teens and adults. Since leaving the classroom, he’s been a tech writer, writing how-to articles and tutorials for MakeUseOf, MakeTechEasier, and Cloudwards.net.He has a degree in History and a postgraduate qualification in Computing. Read more…

Google Maps uses your Android devices magnetometer to determine which direction youre heading. To improve your devices location accuracy, you need to calibrate your compass in the Google Maps app. Heres how.

Your device needs a magnetometer for the compass function to work, and almost all Android smartphones have these included. You also need to install the , if it isnt already.

These instructions should work on all recent Android versions.

Solution : Update iPhone Software And Download And Install To The Latest One

Over a year, Apple roughly releases four updates. For instance, the last iOS update is like iOS 12, iOS 12.1, iOS 12.2, iOS 12.3 etc. Likewise, iOS 13 is going to receive updates in the same manner. So if you havent updated iOS 13 yet, then now the time has come to do it.

Step #1: Open the Settings app.Step #2: hit the General tab.Step #3: Tap Software Update.Step #4: Next , pending update.

Note: Your phone must be connected to the Wi-Fi network. Otherwise, you may be facing unable to check for update iOS issue.

Don’t Miss: Can I Screen Mirror iPhone To Samsung Tv

How To Calibrate iPhone Compass: App Ios 14 Google Maps

Calibrating your iPhone’s compass is very simple, but sometimes the phone’s motion sensor can be out of adjustment. In this article, we will explain how to readjust the motion sensor on your iPhone and then calibrate your compass more accurately. These calibration methods work for most versions of iOS, including the latest iOS 14, and iOS 15.

• iPhone compass level

Disable True North Setting

If the compass on your iPhone is set to show the geographical North it might not work as expected. Here is how to increase its accuracy:-> Open the Settings app.-> Scroll for Compass.-> Disable the Use True North selection.Tip: Also tap on Location and make sure that Precise Location is enabled if youre aiming for high accuracy! It will allow apps to get the exact location of your iOS device.

Don’t Miss: How To Play The 8 Ball Game On Imessage

How To Use The Level Tool

In your Compass app you also have a tool to measure the level inclination of a surface. To access it, slide the main screen to the right. You’ll see two circles appear and in the middle, it indicates the specific degree of inclination.

If you want to reach a completely horizontal level of tilt, you’ll need to move your phone to match the two circles and the screen will turn green at that point.

Compass Not Working On iPhone 1: How To Fix It

Open Settings > Go to Privacy > Turn on Location Services > Go to System Services > then Enable Compass Calibration

2. Disable True North Setting

If the compass on your iPhone is set to show the geographical North it might not work as expected. Here is how to increase its accuracy:

Open Settings > Go to Compass > Disable Use True North selection > Click Location > Enable Precise Location

3. Back Tap your iPhone 12

This means that you need a little pressure to shock your iPhone 12 and unfreeze the Compass.

4. Force Restart

If everything else fails, you may do the all-around troubleshoot that solved a lot of phone issues, force restart.

Now, open the Compass App and it should be back to functioning.

You May Like: How Do You Delete Hidden Purchases On iPhone

Question: Q: My iPhone X Compass Not Working

I found my iPhone X compass not working, with compass app open I have my correct location with Lat/Long & elevation but the compass itself seems like been frozen and doesn’t move at all, It shows the compass rose but the bubble does not move when phone is moved. When you press on the screen the numbers light up & when you press the screen again the numbers go dim but that’s all it will do.

Location Services are on and I have a purple arrow that shows the app is using my location.

I didn’t find this issue when I bought this phone because I didn’t use this function until this time I traveled to London and use Compass and google map for directions.

I have tried turning the phone many times but nothing.

The level app that is in the compass app works just fine.

One more thing I need to mention is: I thought this is SW related problem so when I found IOS 11.2.6 released, I updated immediately, and Compass worked for just 5 minutes!, and it back to not moving as before update, no matter what I tried, it’s not working at all.

I made reservation with Genius Bar this Sat, I assume they won’t change me a new phone, just send back to factory for further analysis instead, I paid 1000+ dollars for this phone, how frustrated.

Solution : Shake Your Apple Handset

Sounds weird, isnt it? Believe me, one of my colleagues got frustrated by this issue and he started shaking the iPhone vigorously and it fixed the Compass app not working the problem on iPhone XR running the latest iOS. However, you can also give a try to this solution, but launch the Compass app and then do it. Besides, tightly hold the iPhone, otherwise, it could go outside your room.

Recommended Reading: How To Disable Private Browsing On iPhone

Solution : Turn Off Location Services

The compass app is part of GPS. Reviving the location services thus eliminates multiple GPS errors. Try to disable and enable location services in a bid to fix the compass app.

• Tap on the settings app.
• Go to privacy.
• Choose location services.
• Select compass app then disable location services.

Use your iPhone compass and check whether its fixed. If it is still broken, try out the next trick.

Solution : Shake Your iPhone

Sounds weird, right? But guess what, it actually works! However, this only works for iPhone XR and later models. Here’s how you do it:

• Launch the compass app
• Hold your phone tightly and shake it vigorously.
• Wait for a few minutes and check if your compass is working. .

This should solve your problem. If not, dont worry. You still have a couple of options left.

Read Also: iPhone To Samsung Screen Mirroring

Calibrate Compass On iPhone

First, you need to check if the Compass Calibration service has been enabled or not. If not, enable the service and do the following,

• Turn Compass Calibration ON.
• Open the built-in Maps App.
• Follow the on-screen prompts to get an accurate location reading.
• Continue to press the lower left side arrow until it starts pointing in the upper direction.
• If your compass is not calibrated, a Calibration Circle screen will pop-up.
• Choose to calibrate the compass by filling out that circle with figure 8 movements in the air.
• Post this you will notice a blue line of sight visible in the Maps application and pointing to the correct direction.

These tips should help you to Calibrate Compass. If it works, well and good, else visit the service centre. You might have a faulty sensor.

Solution : Perform A Factory Reset

The last resort would be to perform a factory reset. Opt for this method after you have tried everything and nothing seems to work. Performing a factory reset will delete all data from your phone. So, make sure you backup your phone or you risk losing all your data.

To factory reset your iPhone:

• Go to the Settings App.
• Select General Menu.
• Choose Erase.
• Youll be asked to enter your passcode. Do so, then tap Erase iPhone to commence the process.

Recommended Reading: How Do You Turn Off iPhone 10

How To Calibrate Compass On Apple Watch

• How accurate is the iPhone compass app?

The compass uses magnetic north by default. To change it to true north, open the Settings app on your Apple Watch, tap Compass, then turn on Use True North. For the most accurate reading, hold your watch flat to align the crosshairs at the center of the compass.

Furthermore, how do I calibrate my apple Compass?

Best answer for this question, how do I fix my appleCompass?

People ask also, how do I reset the calibration on my Compass on my iPhone? Go into Settings/Privacy/Location Services. Scroll down and tap on System Services. Theres a switch to toggle Compass Calibration on/off.

Considering this, why is my iPhone Compass 180 out? Try restarting your iPhone to refresh it and reestablish a connection to the internet. Then check to see if Location Services is enabled for the compass. If the issue persists, try updating your iPhone to iOS 13.4.

How The Compass Works

The iPhone has a built-in Compass . By default, the Compass application is located in the Utilities folder on the iPhone’s home screen, but you can personalise your phone’s menu and relocate this application to another more accessible location if you prefer.

When you run the application for the first time, a message will appear to confirm that you authorize the application to use your geolocation data. Choose Allow While Using App.

Once calibrated, as explained above, you can use the Compass to find your exact coordinates as well as the orientation of your iPhone in relation to the 4 aspects of the world.

Also Check: How To Mass Delete Pictures On iPhone

How To Calibrate iPhone Screen Works For All Models

How to calibrate iPhone screen? Although there is no way to calibrate the capacitive touch screen of an iPhone, you can calibrate the motions sensor as well as the screen brightness if you are facing any problem.

A month ago we posted a guide on how you can calibrate the battery on your iPhone. But what if you want to calibrate the screen on your iPhone? How is this possible? Lets find out in this tutorial.

How Do I Calibrate My iPhone For Walking Distance

Calibrating your Apple Watch for improved Workout and Activity accuracyOn your iPhone, open the Settings app.Tap Privacy > Location Services.Make sure that Location Services is turned on.Scroll down, then tap System Services.Make sure that Motion Calibration & Distance is turned on.Continue with the steps below.

Also Check: Updating iPhone Carrier Settings

Tips To Calibrate Compass On Smartphone

Almost all the Smartphones these days come with magnetic sensors , for a device to be compatible with Android, its implementations MUST meet Android Compatibility Definition requirements. Magnetometer can be seen listed as the sensor requirements under the compatibility definition.

• Calibrate Compass with GPS Essentials App
• Calibrate Compass with Google Maps
• Calibrate Compass on Samsung Phone
• Calibrate Compass on iPhone

How To Set Up And Calibrate The Compass App On iPhone

Digital compasses need calibration. If you’re walking, they can typically use location to figure out which way you’re going. If you’re standing still, though, you may need to play a little game for before they can get going.

After you get the ball all the way around the circle, the compass will be calibrated and you’ll be able to start using it right away!

Also Check: Add Custom Ringtone To iPhone 6

Compass Tips And Tricks

To keep a close eye on the way you are headed, face your destination and tap the center of the compass to establish a line of travel. As the compass moves away from that line, a red arc spreads between your intended heading and your current course. Adjust your path to return to the chosen course. To dismiss the arc, tap the center of the compass once more.

Depending on your location, you may also see additional information noting your GPS position in longitude and latitude, current geographical location, and your elevation above sea level. This information is not available in all areas.

Delete Reinstall And Calibrate The Compass

Remove the app from your iPhone and then reinstall. Then calibrate the Compass app. Since Compass is digital, you may need calibration. Here is how:

• On your iPhone, go to Settings > General > iPhone Storage, find Compass and tap Delete App and tap Delete App again.

• Now open the App Store app on your iPhone and find the Compass app and download and install.

• Open Compass.
• Try to hold your phone flat.
• You will be prompted to calibrate.
• Follow the onscreen instructions.

Don’t Miss: How To Pull Up Old Messages On iPhone

Solution : Restore iPhone In Dfu Mode

Our last option to resolve this error is to restore the iPhone. Restoring iPhone will delete all the data from the iPhone. Make sure to backup iPhone otherwise you may lose the iPhone data.

Step #1: Connect iPhone to the PC using the original Lightning cable.Step #2: Launch iTunes.

For iPhone 8 or later,

• Press and release the Volume Up button.
• Press and release the Volume Down button.
• Hold down the Side button until the Apple logo appears on the screen.

For iPhone 7/7Plus,

• Press and hold the Volume Down button and Side button until the Apple logo appears on the screen.

For iPhone 6S or 6S Plus,

• Press and hold the Home button along with the sleep/wake button until the Apple logo appears on the screen.

Step #4: On the iTunes screen, the pop-up will ask you to Restore or Update iPhone.Step #5: Select Restore.

How You Can Calibrate Compass On iPhone 8 And iPhone 8 Plus

The new Apple iPhone 8 and iPhone 8 Plus comes with an effective Compass that a lot of people dont know how to use. There are several third party apps that you can download from the Apple App Store that will allow you to effectively use the Compass feature on your Apple iPhone 8 and iPhone 8 Plus.You can also make use of the pre-installed compass that comes with your iPhone. Its important to point out that before you download any of these apps, you should calibrate the pre-installed Compass on your Apple iPhone 8 and iPhone 8 Plus. Calibrating the Compass feature On Apple iPhone 8 and iPhone 8 Plus

After you follow the steps above, youll learn how to calibrate compass on iPhone 8 and iPhone 8 Plus.

How To Remove Vocals From a Song

Recommended Reading: How To Play 8ball On iPhone

Improving Compass Accuracy On Ios Devices

The internal compass of your iPhone is a very useful tool. Unfortunately, it is very easy for the compass to become unaligned, particularly when indoors. The following are a few solutions to help improve the compass accuracy of your iPhone or iPad device.

Remove all Magnetic Material from your device

Your iPhone contains a Magnetometer that is used by the internal compass. Any interference from a nearby magnetic source may affect the compass readings. Make sure to remove any nearby magnets. Keep in mind iPhone cases and pop sockets often have magnetic parts built in. If your device becomes unaligned due to the magnet then removing the source will help but you may need to restart your device.

Rotate Your Phone in a Figure 8 Motion

One of the calibration methods your compass utilizes includes motion over time, whether you are walking around or pulling your phone out of your pocket. One trick to help re-align the compass is to shake your phone or rotate it in a large figure eight motion. For a small misalignment this will often help fine-tune the accuracy of your compass.

Enable Compass Calibration in the settings app

In iOS 13 there is a privacy setting to allow your compass to use location services to help calibrate your devices compass. By default, this setting is disabled. Enabling this feature is highly recommended for good compass accuracy.

Restart your iPhone

Disable True North in the settings app