Remove The Screen Protector/tempered Glass
If you’re lucky, the problem for you is being caused by a screen protector that’s got a tiny piece of dirt stuck behind it. The advice then is to remove it, clean your screen thoroughly and then replace the screen protector. Be sure, however, to replace it with a screen protector of very good quality.
If you try to skimp on the quality, you may end up with screen protectors and tempered glass that are made of poor materials. These types of “protectors” cause more damage to your phone than save them from cracking. Basically, the poor quality of materials used on such screen protectors affects the touch sensitivity of the screen beneath it.
A more extreme position would be to completely avoid screen protectors since most modern smartphones come with adequate scratch and fall protection thanks to better quality glass made by Corning or AGC .
Fix 2 Remove Your Phones Screen Protector
The job of a screen protector is to protect the screen from any scratches. There are a number of these protectors available in the market, however, not all of them are fully compatible with your iPhone.
Remove the iPhone Screen Protector
An incompatible screen protector could cause issues like ghost touch on your iPhone as it auto-touches some parts of your screen. A compatible one would never do it as it fits just perfectly fine on your iPhone without any part of it being in touch with your phones screen.
To find out if it is your screen protector that is causing the issue, simply have it removed and then see if you face the ghost touch issue. If you do not, get rid of the protector and get a new fully compatible one for your device.
Restore Your iPhone Via Itunes:
When you repair your iPhone in Recovery Mode it gives iTunes the ability to repair corrupted system data from the most recent iOS update which includes ghost touch.
The chances of major iOS system problems via Recovery Mode are higher. One of the main drawback to doing this is the fact that it affects the data which is stored on your iPhones internal storage.
So its very important to create backups via iTunes before you restore your iPhone. If you would like to restore your iPhone via Recovery Mode you should follow the steps below.
If you have an iPhone 8, iPhone 8 Plus, iPhone X or newer you should follow the steps below to enter recovery mode:
- Connect your iPhone to your computer and launch iTunes.
- On your iPhone, press and release the Volume Up button.
- Press and release the Volume Down button.
- Press and hold the Power button and continue to hold it when the Apple logo appears.
- When the Recovery Mode screen appears, release the Power button.
If you have an iPhone 7 or iPhone 7 Plus, follow the steps below to enter recovery mode:
- You must connect your computer to your iPhone.
- Open iTunes on your computer.
- Press and hold the Power button and Volume Down button simultaneously.
- Hold down the buttons until the Apple logo appears.
- Then release the buttons when the Recovery mode screen appears.
If you have an iPhone 6s or iPhone 6s Plus, or older iPhone models you should follow the steps below to enter recovery mode:
Also Check: How To Play 8 Ball Pool On Messages
Solution : Update Ios
You might not have updated your operating system. If you’re using an older iOS version, you probably already know this. You would have been getting update prompts lately.
There are 2 ways to download the latest firmware, as discussed below:
- Method 1:
- Launch the latest version of iTunes on your computer
- Plug your iPhone 11 to your desktop via USB or lightning cable
- Find your handset on iTunes
- Open the Summary tab
Your device will restart once the latest firmware has been installed. Hopefully, your iPhone ghost touch problem will be gone.
Solution : Enter Into Recovery Mode
You can also fix ghost touch issue on iPhone or iPad by putting your iPhone in Recovery Mode and then reinstall iOS. But, you should try this solution when ghost touch do not allow your iPhone/iPad to update and also when you are unable to reset all settings.
If you are able to update your phone or reset all settings then you can easily do this.
If you are not able to do this then follow the below steps to enter your iPhone 8 or latest in recovery mode.
Note: Before doing this solution you should first take a backup as restoring your iPhone from Recovery Mode will erase all your saved data.
Step 1: First of all, connect your iPhone to computer and then launch iTunes on your computer.
Step 2: Press and release Volume Up button.
Step 3: Press and release Volume Down button.
Step 4: Hold the Top button until you enter in Recovery Mode.
Once you enter in Recovery Mode, iTunes will show a message There is a problem with the iPhone that requires it to be updated or restored. And if the update is available then click on Update button or Restore.
You May Like: What Phone Cases Fit iPhone Xr
Check iPhone Touch Screen
This step involves cleaning the touch screen, removing the phone case, screen protector, etc. If your iPhone has a case, you can start by removing the case. If the ghost touch problem persists, remove the screen protector. After removing it, try to check if the issue is resolved before placing a new protector on the screen. But if none of the two options above worked, you can check for dirt on the screen. Because if there is dirt or liquid on the screen of your iPhone, it may be triggering certain functions causing the iPhone ghost touch log. You can use a soft and slightly damp cloth to clean the screen.
Best Way To Fix iPhone Ghost Touch Without Data Loss
The best way to repair your iPhone Ghost Touch problem and 150+ other problems is to use UltFone iOS System Repair. It can help you remove bugs and glitches from your phone in few simple steps without any data loss. Here is a list of some of the most prominent features of UltFone iOS System Repair:
- 1-click to enter and exit recovery mode on iPhone/iPad/iPod.
- Fix 150+ iOS system issues like reboot loop and black screen without data loss.
- Reset iPhone/iPad/iPod Touch without password/iTunes/Finder.
- Unlock disabled iPhone/iPad without passcode.
- Downgrade from iOS 15 beta without iTunes.
- Support all iOS versions and iPhone models including the latest iPhone 12 series.
Heres how to use UltFone iPhone System Repair:
- Step 1 Connect your phone to your PC using a lightning cable and open UltFone iOS System Repair.
-
Step 2 Click on the Start button.
-
Step 3 Now select the Standard Repair.
-
Step 4 After that, it will show you an option to download the firmware for your iPhone. If you have already downloaded it, you can click import local firmware at the bottom of the screen.
-
Step 5 After the download, click Start Standard Repair and the program will start repairing the ghost touch issue on your device.
-
Step 6Thats all. Now click Done and you are all good to go.
If none of the above-mentioned methods works, then you should go for a screen replacement. And it is highly recommended to get your screen replaced by Apple customer support.
You May Like: iPhone Sound Check
S To Restart iPad That Has A Home Button
Step 1: Press and hold the Side button until the power off slider display.
Step 2: Now, swipe the slider and wait for 30 seconds to turn off your device.
Step 3: To turn on your device, press and hold the Side or Top button until the Apple logo display on your devices screen.
Tip 2 Clean iPhone Screen
The 2nd measure to try is to clean your iPhone screen to get rid of the iPhone ghost touch problem.
The safest and most effective way to clean the screen is to use a microfiber cloth. You can also wet the microfiber cloth with distilled water and wipe the screen. Don’t forget to turn off your iPhone before the cleaning process.
Recommended Reading: How To Hide Siri Suggestions
Remove Your Phone Screen Protector/phone Case
As mentioned before, sometimes the problem can be due to some entrapped dust particle under your screen protector. This can cause your phone screen to act up crazy. The simple solution for this problem is to remove the current screen protector. Clean your iPhone screen properly and then install the protector again.
Another reason might be a very tight phone case. It is never recommended to use such a case with your iPhone but if you have such a case or even any case, try removing it and then using iPhone.
How To Force Restart Your iPhone:
When you Force Restart your iPhone it will enter Recovery Mode, follow the steps below to Force Restart your iPhone which will enable you to restore your iPhone via the Recovery Mode.
This method will work on iPhone 8 or newer.
- Press and release the Volume Up button.
- Press and release the Volume Down button.
- Press and hold the Side button.
- When the Apple logo appears, release the side button.
Follow the steps below to Force Restart the iPhone 7:
- Press and hold the Volume Down button and the Sleep/Wake button.
- When the Apple logo appears, release both buttons.
Follow the steps below to force restart the iPhone 6 or earlier:
- Press and hold the Home button and the Sleep/Wake button.
- When the Apple logo appears, release both buttons.
Read Also: iPhone Stuck On Apple Loading Screen
What’s Ghost Touch How Does It Affect Your iPhone
iPhone Ghost Touch is one of those side effects we were not expecting from the iOS update. After that iOS 15/14 update, tons of users started experiencing this annoying bug where their screen starts automatically responding. This gets more annoying with time as it starts happening more and more often. Users have reported that they cant even unlock their Phone properly and they end up changing the screen altogether.
One of the multiple reasons behind the issue can be that the pins of the connectors are not seated properly due to which the phone acts up all crazy but this and all other causes we will discuss in the next section.
How To Fix The iPhone Ghost Touch Problem
You can fix iPhone ghost touch problem by getting rid of anything that may have affected the screen, such as dirt and liquid, a screen protector, or a tight case. Software issues can be resolved with as little as a restart or as much as a factory reset.
Some weeks ago, my iPhone started to have this issue, and to say I was annoyed would be an understatement. It ended up calling people, opening apps, and sending nonsensical messages all on its own. I made it my mission to fix it and eventually succeeded, so I’m here to share those tips with you.
Now , let’s get into how to fix the ghost touch issue on your iPhone.
Contents
Also Check: How To Hit The Ball In 8 Ball Pool Imessage
Easy Tips To Fix iPhone X Ghost Touch Problem For Free 2022
User Concern
Any fix to this irritating ghost touch and screen sensitibility latency??? – Chrissy71 from Apple Community
It is very normal and common to find iPhone screen broken or water damaged. However, it is aberrant and strange if the screen doesn’t respond correctly to what you are actually making, or becomes completely unresponsive.
Many iPhone users reported that the screen is responding itself even though they do not touch the screen. And sometimes the screen doesn’t respond at all. The phenomenon is called “iPhone ghost touch”.
In most cases, lock and unlock screen can temporarily solve the problem. However, what makes this problem become complex is that it occurs randomly and hardly preventable.
So the question is, what is ghost touch, what causes the issue of ghost touch on iPhone and what are the solutions?
How To Clean The Display Screen On Your iPhone:
Before cleaning the display screen on your iPhone, you must unplug all cables attached to it and you must turn it off.
Then you should get a soft lint-free cloth and disinfectant. When cleaning your iPhone, Apple has stated that you should not spray the disinfectant directly onto the iPhone.
Instead, it should be sprayed onto the lint-free cloth, and you must wipe it from one end to the other.
While youre cleaning the display screen you must avoid getting any liquid into the iPhones charging port or any other openings.
Apple has also stated that you should not use household cleaners or cleaners which contain hydrogen peroxide or abrasives.
If you do this, you may erode the oil-resistant coating on your iPhone.
Screen protectors provide a layer of protection that may stop the display screen from breaking in the event of an accidental drop.
However, a screen protector has the potential to affect the way the touchscreen works. Thus the reason why you may be able to stop ghost touch by removing it.
A screen protector is a thin layer of laminated tempered glass or plastic that you can place directly on top of your iPhones display screen to protect it.
Even though screen protectors provide a great way for you to protect the display screen on your iPhone.
Sometimes they may negatively affect the way the display screen works by causing problems such as ghost touch.
Read Also: How Do U Screen Record On An iPhone 11
Does Apple Fix Ghost Touch For Free
THIS IS AN iPHONE X EXCLUSIVE SERVICE.
For the iPhone X users, yes there is good news for you. Apple recently recognized the iPhone X screen problem on their official support page. They also offered free screen repair to all those iPhone X users who are experiencing the problem of iPhone ghosting but here the sad part is that no other iPhone models owners can avail of this service.
Common Ways To Fix iPhone Ghost Touch
Some of the common ways to fix iPhone ghost touch are discussed below:
1. Get Rid of Dust on Your Screen
One of the common reasons for ghost touching is that there are some dust particles on your device which make your iPhone auto perform tasks. To get rid of this problem, make sure that your device is dust clean and free from any other particles by using soft microfiber cloths regularly.
2. Remove Your Phones Screen Protector
Sometimes your iPhone screen protector becomes the reason for ghost touching as it is incompatible with your iPhone device as it touches some part of the device automatically. So, by removing your iPhones screen protector you can solve your problem if it is the reason for ghost touching.
3. Remove the Case of Your iPhone
Another reason for ghost touching is the incompatibility of the iPhone case just like the iPhone screen protector. Of course, the manufacturer tries their best to make the fully compatible mobile case but sometimes they did not make it compatible. You can even see the fault especially from the corners and that makes your device perform a function on its own. So, to get rid of this issue, remove the case and use a fully compatible and high-quality mobile case.
4. Force Reboot Your iPhone
5. Update the iOS Version on Your iPhone
6. Reset All the Settings on Your iPhone:
7. Factory Reset Your Device
You May Like: Apple Screen Mirroring To Samsung Tv
What Is The Ghost Touch Problem
Ghost touch are the terms used when your screen responds to presses or inputs that you’re not actually making, or when there’s a section of your phone screen that’s completely unresponsive to your touch. Exactly what the ‘ghost’ presses will do varies from device to device, but it seems to be more common in some devices than others.
Some of the devices that have been famous for being susceptible to ghost touch issues include the old Motorola Moto G4 Plus, several models of the Apple iPhone including the iPhone X, iPhone 11, and the iPhone 12 series, and some older OnePlus devices. All of that is to say, if you’re having a ghost touch issue, it’s probably not a problem with the software.
In more severe cases it’s a hardware problem with your display and the way it’s housed inside the chassis of your phone. If you’re an engineer and are ok taking electronic devices apart , multiple people have reported success simply from disconnecting the screen from the data connectors.
In other situations, water or dirt damage can cause ‘phantom’ presses that aren’t being made. There’s no definitive single cause, or fix, for the problem, however, so you’ll have to use some trial and error to fix the issue. This is especially true if you happen to be out of warranty and you wish to avoid visit to the service center.
Reset All Settings To Fix Atypical Display Motions On iPhone 11
- Head over to the Settings > General > Reset.
- Tap on Reset All Settings.
- If prompted, enter the passcode and continue.
- Tap on Reset All Settings to confirm the process.
- Then reboot your iPhone.
- Go to the iPhone Settings > General > Reset.
- Tap on Erase all content and settings.
- If prompted, enter the passcode.
- Next, confirm the task by tapping to erase the internal data and settings on your iPhone.
Don’t Miss: Game Pigeon Hacks 8 Ball
How To Fix Ghost Touch On iPhone: 9 Potential Fixes To Try
Does your iPhone perform actions on its own? You might have the “ghost touch” issue. Here are several possible fixes for it.
“Ghost touch” is what happens when your iPhone screen moves or starts doing things on its own. The screen seems to react to nonexistent touches, which means apps open and start doing stuff without you having touched anything. Unsurprisingly, such strange actions can be more than a little annoying.
However, while ghost touch sometimes requires you to take your iPhone to Apple for a repair, you can try a number of quick fixes for free. These range from cleaning the iPhones touchscreen to performing a factory reset.