First Make Sure You Have The Latest Itunes Version
First, youll need to make sure youre using the latest version of iTunes. With the program open, head to iTunes > About iTunes.
Make a note of the version youre using, and check it against this official Apple Support page to see if youre on the newest release.
With that out of the way, youre ready to get started. The rest of the procedure varies slightly depending on what device youre using, so well go over them one at a time.
Dfu Mode Can Fix Most Of Your iPhone Issues If Nothing Else Works
Yes, it can be a little tricky to get your iPhone, iPad, or even iPod touch into DFU mode since the timing is a little tricky. However, with perseverence, you should get it. It just takes a few tries, even for us pros. If you’re experiencing some issue with your device that nothing else seems to help with, then restoring in DFU mode is probably your best bet.
These are still the steps to take to go into DFU mode.
Locked up
Some Issues That Can Be Fixed By iPhone Safe Mode
There are several iOS issues that can be corrected by entering iPhone Safe Mode. Here are some instances when safe mode is needed:
- When there is need to load only required extensions.
- When you want to disable pre-installed tweaks.
- When you want to prevent extensions from opening automatically.
- When you want to delete tweaks that are no longer needed.
Now you should know how to enable or disable your iPhone safe mode after reading this article. If it did not help after a hard restart on your iPhone, then you can try a complete reset your iPhone by using a third-party reset tool like iMyFone Umate Pro, which can help you completely reset your iPhone and start all over again. So you can use your iPhone normally without any trouble.
Also Check: Closing Open Apps On iPhone 11
How To Put iPhone 6/6s Or Earlier iPhone Se iPad And Ipod Touch Into Dfu Mode
iPhone 6s is the last iPhone model with a Home button, which is released in 2015. Similarly, some iPad and iPod touch models also have the Home button. Thus, how to put iPad mini 4 in DFU mode? How to enter DFU mode on iPad Air? or how to put iPad into DFU mode?
Suppose that you have the same queries. In this case, the following instructions may be helpful to you.
1. Connect your iDevice to the computer via a USB cable and run iTunes or Finder.
2. Power off your iDevice if you don’t already.
3. Press and hold the Home + Lock button for 8 seconds. Later, release the Lock button but continue holding the Home button until iTunes says your iDevice has got into the recovery mode.
How To Put iPhone 13 12 11 X Or iPhone Se 2020 8 In Recovery Mode
Note: In case you do not see a pop-up in Finder or iTunes in step 5, but see the lightning cable and MacBook logo on iPhone, release the button. Next, manually click on your iPhone under Locations from the left Finder sidebar on Mac or iPhone icon in iTunes.
Don’t Miss: Cancel Call Forwarding On iPhone
How To Turn Off iPhone 12
Powering down the iPhone 12 can be accomplished via a couple of methods. The easiest way to power down the iPhone 12 is to hold the Side button along with one of the volume buttons until the slide to power off slider appears at the top of the screen. From there, just slide to power off your iPhone.
You can also go to Settings General, scroll down to the bottom of the page, and tap the Shut Down button. This will cause the slide to power off slider to appear at the top of the screen.
What Is Dfu Mode And Its Use
Device Firmware Update or DFU mode lets your iPhone to connect with iTunes on computer without iBoot. As DFU mode doesnt use iBoot, you can make changes in the operating system of the iOS device. An iPhone in DFU mode has completely black screen.
Putting iPhone into DFU mode is the solution when Recovery Mode doesnt resolve the problem. DFU mode can restore or upgrade iPhone. This mode is also commonly used to downgrade or jailbreak iPhone.
Read Also: Why Is My iPhone Loading
Check iPhone And iPad In Ios : Turn Safe Mode On And Off
The new Apple iPhone and iPad in iOS 10 has a Safe Mode feature that allows users to access the iOS in case they have any troubleshooting issues with their Apple iPhone or iPad in iOS 10, as the Mode Safe allows the phone to start, so only the software and programs required for the operating system are running. It is important to be able to enable Safe Mode on iPhone and iPad in iOS 10 if any of your apps are not working properly or if your iPhone or iPad in iOS 10 keeps restarting, as Safe Mode can be a vital troubleshooting tool. .
The Safe Mode feature on the Apple iPhone and iPad in iOS 10 is a setting that allows iPhone and iPad owners in iOS 10 to safely uninstall apps and remove bugs. Once you enable the iPhone and iPad in the safe mode of iOS 10, you will be able to uninstall apps without damaging the device. Next, we will explain how you can turn Safe Mode on and off on your Apple iPhone and iPad in iOS 10.
- How to fix an iPhone that restarts on its own
- IPhone screen wont turn on solution
- IPhone issues with touch screen resolved
- How to fix iPhone gets hot
- How to fix iPhone camera not working
- How to fix iPhone power button not working
How to activate safe mode on Apple iPhone and iPad in iOS 10:
The One Stop Solution For All Your Windows Related Problems
Safe Mode, also known as Recovery Mode, allows you to reboot iPhone 3GS resources, restore apps, and restore your line to a working state. Safe Mode works hand in hand with i-tunes to properly restore your phone before you need to take it to an Apple Authorized Repair Center.
You May Like: How To Take A Screen Shot On iPhone 5s
How To Put Your iPad Pro With Face Id Into Dfu Mode
Since the 3rd-generation iPad Pro , Apple got rid of the Home Button and Touch ID on current iPad Pro models in exchange for Face ID, just like with the higher end iPhone models. So getting it into DFU mode is just like with an iPhone with Face ID.
What Is Dfu Mode
If you are wondering what the heck DFU mode is, youve come to the right place. In this article, youll learn how to enter it. To enter DFU mode, you need to connect your device to a computer. Turn the device off first by pressing the power button for three seconds. Then, hold the Home button and the Sleep/Power buttons for 10 seconds. Wait for the Apple logo to appear.
If your device is still in recovery mode, connect it to your Mac with a USB-C cable. Once the iTunes window appears, connect the two Mac computers with the same USB-C cable. The Macs should be powered off. Then, go to your iTunes. There, click on the Recovery tab and click on Restore from DFU Mode.
Once your iPhone is in recovery mode, press the Home button, followed by the volume up and down buttons. When the screen illuminates, the Apple logo should appear. If it does, repeat the process. You can also use the iOS System Recovery software to restore your data. It will detect DFU mode and download the correct iOS firmware. You can use the software to restore your data if you accidentally enter the recovery mode. You can also use iMyFone Fixppo software to identify your iPhone in DFU mode and prompt you to download the appropriate iOS firmware.
Don’t Miss: How To Reset Autofill On iPhone
How To Put Your iPhone Or iPad Into Recovery Mode
It doesn’t matter if your iPhone is several years out of date or the best iPhone that money can buy problems, both software and hardware, can happen to anyone. If you’re iPhone, iPad, or iPod touch has frozen up, become unresponsive, or worst of all, stopped working during a software update, recovery mode might be just what you need to get things going again. It’s painful, so it’s more of an almost-last resort than a first step. It’s not complicated, however, and knowing about recovery mode is important if you ever need it. But just because you knew how to use your iPhone in recovery mode on a previous model doesn’t mean it works the same way on your newer phone. This process will change depending on what iPhone model you have.
The good news about recovery mode is that it’s generally set for your model of device, and doesn’t change with software updates. So if you just downloaded iOS 15 onto your iPhone 11, for instance, recovery mode will be the same as it was when you had iOS 14 installed.
Here’s how to use your iPhone in recovery mode.
Why I Cant Go To Safe Mode On Apple iPhone 5c
On most IOS devices, while powered on, press and hold Power until the Power Off menu appears. Press and hold the Power Off selection until the Safe Mode prompt appears. Tap OK.
If the problem disappears in Safe Mode, then something you installed is causing the problem. You may have to uninstall apps one by one until the problem disappears. If the problem persists in Safe Mode, then its more likely to be a hardware or firmware problem.
It may be volume key not work properly
Thank you for coming to our Page. If this Enable Safe Mode on Apple iPhone 5C helped you , So then please share this website to all Social Medias like Facebook ,twitter and Reddit so then Others can find this SafeMode Guide. Finally If you have any problem then dont hesitate, feel free to Leave a Comment with Error Message.So one of team our team member will help you as soon as possible.Thank You for Staying with us. Keep viewing our page and dont forget to we will update you with the latest news.
Read Also: Cannot Verify Server Identity iPhone Ios 14
Use This Feature To Troubleshoot A Slow Device
- University of Texas at Arlington
- Wichita Technical Institute
If your Android device is powered on and apps such as a clock or calendar widget on the home screen crash frequently or run slowly, start your Android in safe mode to track down the problem. Running your device in safe mode won’t solve the problem, but it can help you figure out the cause. Here’s how.
How To Troubleshoot Apps
If the problem no longer occurs while in Safe Mode, you’ve determined that the problem is caused by a third-party app that was downloaded to your phone.
1. Remove apps downloaded around the time the problem began. Visit the App Troubleshooting tutorial if you need instructions.
2. To exit Safe Mode, press and hold the power button. Select “Restart.” If you aren’t prompted to restart, continue to hold the power button until your device restarts.
Don’t Miss: Siri App Suggestions Based On
iPhone: Safe Mode Start
For iPhone 7/iphone 7 Plus Or Later
If youre using an iPhone 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, or XR, heres what to do.
First, make sure your phone is off. Then, press and release the volume up button.
Next, immediately press and release the volume down button.
Now, hold the side button, the only one on the side opposite the volume buttons. Dont let go of the button even when the Apple logo flashes onscreen. Continue to hold until the Recovery Mode screen appears.
Once that screen appears, go ahead and connect your device to your computer via Lightning Cable.
You May Like: Mirroring iPhone To Computer
Force Restarting And iPhone Recovery Mode Explained
You hopefully won’t need to force restart your iPhone often, and almost never have to put it in recovery mode. But it’s important to know for those occasions when something goes wrong.
When your device becomes completely unresponsive and you can’t shut it down with the usual method, instead of waiting for the battery to deplete, you can initiate a force restart. A force restart is basically the equivalent of pulling a desktop computer’s power plug, as it forces your iPhone to shut down and start up again.
Recovery mode takes this a step further, putting your device into a state where you can reinstall iOS by connecting your iPhone to a computer running iTunes . If your iPhone refuses to boot, crashes on startup, or gets stuck on the Apple logo for a long time, you’ll need to put the device into recovery mode in order to rescue it.
Note that when you reinstall iOS, you’ll lose all the data on your iPhone. This isn’t a problem if you make regular iPhone backups, which you can do using iCloud or locally in iTunes or Finder. Unfortunately, you can’t back up your device in recovery mode, since the process will only offer to restore the firmware.
As such, if you are stuck with an iPhone that won’t boot and you don’t have a backup to restore, there’s nothing you can do to save your data.
How To Put iPhone 7/7 Plus In Dfu Mode
If you are using an iPhone 7 Plus/7 and want to put iPhone 7 Plus/7 into DFU mode, you can refer to these steps.
How to go into DFU mode on iPhone 7/7 Plus?
1. Power off your iPhone 7/7 Plus and plug it into your computer with a USB cable. Ensure that you have installed the latest version of iTunes on the computer.
2. Press and hold the Side + Volume Down buttons for 10 seconds and then release the Side button but keep holding the Volume Down button.
3. When iTunes pops up a message, that reads “iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.”, release the button and tap OK.
You might need: Your iPhone location is wrong? If you want to fix it, you can follow this guide.
Also Check: How To Play 8 Ball On iPhone Messages
How To Turn On iPhone 12
To power your iPhone 12 back up, press and hold the Side button until the Apple logo appears on screen. If this doesnt work, your iPhone may need to be charged. If your iPhone has a black screen and the Side button doesnt function, it could be because your iPhone 12 is in DFU mode. See the tutorial for exiting DFU mode below.