Sunday, August 14, 2022

How To Turn On Double Tap On iPhone

Must read

How To Turn Tap To Wake Off

iPhone 12’s: How to Use/Enable Back Tap (Double Tap or Triple Tab)

If for whatever reason you decide that you dont want to have Tap to Wake enabled, you can turn this feature off. Heres how to turn Tap to Wake off:

  • Open the Settings app on your iPhone.
  • Scroll down and tap Accessibility.
  • Tap on Touch under the Physical and Motor section.
  • Toggle Tap to Wake to the Off position.
  • Sur Ios 14 Vous Pouvez Dclencher Des Actions Avec Un Double Tap Au Dos De Liphone

    2 min

    Lors de la WWDC, sa conférence annuelle centrée sur les logiciels, Apple a coutume de présenter ses nouveaux systèmes dexploitation dans les grandes lignes lors de la conférence dintroduction. Mais très vite, les versions bêta de ces systèmes sont mises à disposition des développeurs et des ateliers sont organisés pour aller plus en profondeur. iOS 14 ny échappe pas et chaque jour, la communauté découvre de nouvelles fonctionnalités cachées. pour son efficacité : un double tap à larrière de votre iPhone permet de déclencher une action, au choix de lutilisateur.

    Then Just Lock Your iPhone And Tap The Screen Just To Make Sure That Its Working Properly

    How to turn off double tap on iphone 7. Set it to either on or off, depending on which. You will know that it is turned off when there is no green shading around the button. Tap on back tap at the bottom

    To do so , go to settings > accessibility > touch. Turn off the voiceover setting you should now be able to use your iphone 5 as you previously had been, where tapping an icon once would open it and you could scroll through menus with one finger. If playback doesn’t begin shortly, try restarting your device.

    Now, a lot of folks misinterpret that instruction so well go over it again. The actions are as follows: This is the grey icon with cogs on one of the home screens.

    The touchpad disable zone feature allows you to enable or disable the touchpad by double tapping on the corner zone of the touchpad. To prevent any accidental taps, its better to turn off double tap to wake on the iphone. Then turn off the toggle button next to tap to wake .

    To enable, or disable, magnification gestures you need to. Practice the following gestures with one, two, three, and four fingers: How to enable or disable double tap to enable or disable touchpad in windows 10 if your windows 10 pc (ex:

    Disable voiceover to get back to business as usual on your iphone. Turn on the screen, unlock device, and launch application. Double or triple tap on the back of your iphone to trigger the action you set.

    How To Take Screenshot In Apple iPhone 7 Plus Capture Screen Youtube

    Also Check: Does iPhone 8 Have Portrait Mode Selfie

    How To Use The Apple Logo As A Secret Button

    Once you have setup Back Tap, using the feature is very easy. You just double tap or triple tap the back of your iPhone around where the Apple logo is. It works even when you have a case on in our experience, though we haven’t tried it with all cases of course.

    You don’t need to push the logo, just double or triple tap the logo with your finger and the shortcut you have selected for that action will happen straight away, whether a call or a screenshot.

    Note: If you have a case on, you may just need to make a note where the Apple logo is on your device. For the iPhone 11, 12 models and iPhone 13 models, it is in the middle of the rear for example, while on the iPhone XR, it is above the middle in the top third.

    If you’re looking to buy the new iPhone 13, you can get some amazing deals on EE, the UK’s best network for 4G and 5G. Here are some of the best.

    How To Double Tap On The iPhone 13

    Double tap the Shift key on your keyboard to turn on caps ...

    1. Launch the Settings app on your iPhone.

    2. Then, scroll a bit down and pick ‘Accessibility.’

    3. You now need to tap on ‘Touch.’

    4. Scroll to the bottom of the page and select ‘Back Tap.’

    5. You should now see two options on your screen ‘Double Tap’ and ‘Triple Tap.’

    6. Go ahead and select ‘Double Tap.’

    7. Youll now see a long list of possible actions. Take your time and make your pick.

    8. To enable a specific action, tap on its name.

    9. Select ‘Back Tap‘ at the top to return to the previous screen.

    10. Finally, double tap on your iPhone 13s back to try the newly set up feature.

    Before we let you go, a few valuable pieces of advice. When choosing a double-tap action, you can choose from several groups of possible actions related to controlling iOS, triggering accessibility functions, scrolling, or activating one of your shortcuts . Some of the possible actions include accessing the App Switcher, going back to your phones home screen, controlling your devices volume, and more.

    With that said, know that your double-tap possibilities are practically endless. That especially goes for those willing to dive into the Shortcuts app and create their own shortcuts. In iOS 15, that app has been further simplified, and we highly recommend checking it out.

    Read Also: How To Delete Emails Fast On iPhone

    How Can I Turn Off The Double Tap From My iPhone

      With default settings intact, your iPhone merely requires a single tap of an on-screen button to select an item. If that changes, then you’ve unwittingly enabled VoiceOver, an accessibility feature on your iPhone. When enabled, your iPhone will speak menu items when you select them and require you to double-tap menus to open items. Disable VoiceOver to get back to business as usual on your iPhone.

      Step 1

      Tap “Settings” then double-tap “Settings” from the iPhone’s home screen to open the app. Use this method to select menu options.

      Step 2

      Select “General” to view more options.

      Step 3

      Select “Accessibility” to view more options.

      Step 4

      Select “VoiceOver” to open VoiceOver options.

      Step 5

      Select the “On” listing to change VoiceOver to “Off.”

      References

      Warnings

      • Steps in this article apply to iPhone devices running iOS 6.1. Different versions may require different steps.

      Writer Bio

      Aaron Wein is a copy editor for Skagit Valley Publishing. He has been a writer and editor since 2004, contributing to Washington-based publications and clients such as the “Bellingham Herald,””Western Athletics,””GNAC Sports” and Microsoft. Wein obtained a bachelor’s degree in journalism from Western Washington University.

      Image Credit

      Get The Custom Mute Shortcut

      Before we configure the Back Tap in Settings, we have to set up a custom shortcut that mutes your phone when you run it, and then unmutes it when you run it again. To save time, you can download our custom How-To Geek Mute Toggle shortcut. However, if youd prefer to build it manually, youll see the entire code below.

      To download our custom shortcut, youll have to enable untrusted shortcuts in Settings. This will allow you to download shortcuts that have been shared by others on iCloud that havent been verified by Apple.

      Apple is careful about this because some shortcuts can do malicious things to your phone. In this case, youre getting a harmless muting shortcut. Well explain how it works below.

      First, open Settings and tap Shortcuts.

      Toggle-On theAllow Untrusted Shortcuts option. When were done, you can revisit this setting and turn it off again, if you prefer.

      Next, visit this iCloud link on your iPhone and tap Get Shortcut to download the custom mute toggle shortcut.

      The Shortcuts app will open. Youll see an Add Shortcut window that allows you to evaluate the shortcut before you add it to your device. Scroll down and tap Add Untrusted Shortcut.

      The Mute Toggle shortcut will then be added to your list in the Shortcuts app. Again, if you prefer, you can go back to Settings and toggle-Off Allow Untrusted Shortcuts for security.

      Recommended Reading: How Big Is A iPhone 8 Plus Inches

      How To Take A Screenshot By Tapping On Your iPhone

      Ordinarily, youd take a screenshot by using a combination of physical buttons on your iPhone, but its easy to fumble them and accidentally lock your iPhone or adjust the volume. With this tip, a quick screenshot is only just two or three taps away.

      First, open Settings by tapping its gray Gear icon. You can usually find it on the first page of your Home screen. If not, try Spotlight Search or Ask Siri.

      In Settings, tap Accessibility.

      On the next screen, tap Touch.

      On the Touch Settings screen, scroll down until you see the Back Tap option, then tap it.

      In Back Tap settings, you have a choice of assigning the screenshot action to either two taps or three taps on the back of the case. Select the option youd like.

      In the menu that pops up, scroll down the list until you locate Screenshot, then select it.

      After that, go back one menu level to make sure your selection is saved, then exit Settings.

      The next time you tap two or three times on the back of your iPhone, iOS will capture an image of your iPhones current screen and save it to an image file. The screenshot images you take will be saved in your photo album as usual, and they can be viewed later in the . Have fun!

      Ios 1: How To Enable And Use Back Tap Feature

      How to Turn off Double Tap Screenshot on iPhone

      Do note that this feature only works on iPhone 8 and newer models running iOS 14. Additionally, this feature is not available on the iPad. With that being said, follow these steps to enable back tap on your iPhone.

    • On your iPhone, go to Settings.
    • Scroll down a bit and go to Accessibility.
    • On the next screen, under Physical and Motor, tap Touch.
    • Scroll to the end and go to Back Tap.
    • You’ll now see two options Double Tap and Triple Tap.
    • You can assign any action that’s available in the list. For example, you can set the Double Tap action to take a quick screenshot, while the Triple Tap action can be assigned to quickly access the Control Centre.
    • After you’ve assigned the actions, exit settings. You can now start using back tap on your iPhone.
    • Read Also: Can iPhone Users See When Android Users Are Typing

      How The Mute Toggle Shortcut Works And How To Customize It

      You dont have to understand the Mute Toggle shortcut to use it, but for those who want to customize how it works, heres a bit more information.

      The shortcut is the current volume of your iPhone, and it sets it to a variable called CurrVolume. Next, it performs an If-Then statement. For example, if the current volume isnt already 0 , it then sets the volume to 0%, muting the phone.

      Otherwise, the shortcut assumes your phone is muted and sets the volume to 50%.

      Once you have the shortcut, you can customize the volume at which your iPhone will be set when you toggle-Off mute. This is set at 50%, but you can choose any value.

      To change it, scroll down in the code to Set Volume to 50% and tap 50%.

      A slider appears above so you can set the unmuted volume anywhere from 1-100%, with 0% being silent and 100% being full volume.

      After you set the volume, tap Done at the upper right, and youre ready to go!

      Note that restoring the original volume when you unmute requires dramatically increasing the complexity of the shortcut. This is because variables like CurrVolume arent preserved between shortcut executions, so weve skipped that method here.

      Next, well configure how to activate the shortcut.

      How To Use Back Tap On iPhone Running Ios 15/14

      With iOS 14, Apple has added a new feature under Accessibility settings called Back Tap. You can customize it to launch system actions like open Notification Center, take a screenshot, App Switcher, Accessibility features, or add actions from the Shortcuts app. Once you set it, you can double or triple tap the back of the iPhone to perform the said actions. Let me show you how.

      Don’t Miss: Ipod Sound Check

      Double Tap The Back Of Your iPhone To Lock

      Back Tap is tucked away in the iPhones settings.

    • To activate, go to Settings> Accessibility> Touch.
    • Scroll all the way down and go to Back Tap.
    • Here, you can assign a command to respond to Double Tap and/or Triple Tap.
    • Select Lock Screen and youre done.
    • ALSO READ: Apple Watch 6, Watch SE price in the Philippines revealed

      Alternatively, you can choose other commands that activate when you double or triple tap the back of your iPhone, ranging from volume controls and spotlight search, to shortcuts you can create through the Shortcut app.

      On my iPhone, I have Double Tap set to Lock Screen and Triple Tap to Control Center for easier access.

      Give Back Tap a try and let us know how it works out for you.

      Image Credit: Unsplash

      • Ads

      Now Anytime You Need A Screenshot Just

      How to make your iPhone stop talking by turning off ...

      How to turn off double tap on iphone for screenshot. You asked, how do you turn off tap screenshot on iphone? In such a case, you might want to turn off the double tap to screenshot option. Tap double tap or triple tap and choose an action.

      Head over to the accessibility option. Double or triple tap on the back of your iphone to trigger the action you set. Scroll down and tap on accessibility

      As well as screenshots, apple lets you set a double or triple tap to turn the volume up or down, magnify, scroll up or down and more. Now when you double tap the back of your iphone, your smartphone will. This mostly works but id like my lock button back.

      You’ll have the choice to turn on double tap or triple tap. Make sure your iphone is updated to ios14.open settings.open ‘accessibility’open ‘touch’scroll to the bottom of the page, and choose ‘back tap’select ‘double tap’ or ‘triple tap’ to pick an action.select the ‘screenshot’ option for screenshots.also, how do i If you want to set one of these to screenshot, select double or.

      From there, you need to tap touch and scroll down until you see the option for back tap. 1 head into your settings > advanced features. One of the new ios 14 features apple has rolled out is back tap, a set of shortcuts that allow iphone users to double or triple tap the back of their phones to perform various tasks.back tap is a great iphone accessibility feature for people with reduced dexterity or.

      Don’t Miss: Metropcs iPhone 11 Monthly Payment

      What To Do If You Cannot Turn Off Screen Zoom On Your iPhone

      After you follow the above steps, you should be able to successfully unzoom iPhone screen and even turn off this feature. However, if in rare cases, double-tapping with three fingers did not work for you or you could not navigate around the screen to turn off zoom, use this method.

    • Connect your iPhone to Mac or PC using a Lightning cable. If you are on a Mac running macOS Catalina or later, open Finder. If you are on macOS Mojave or earlier or a Windows PC, open iTunes.
    • Click on your iPhone name or icon .
    • From the General tab, click Configure Accessibility.
    • Uncheck the Zoom checkbox and click Ok. Immediately, the iPhone screen will return to normal.
    • This is how you can get out of the zoomed iPhone or iPad screen. I hope this quick guide was helpful. iOS has multiple such accessibility features, and some of them, like Back Tap and Magnifier, are useful for all. Give them a try. Plus, if interested, you may explore more accessibility features and news here.

      How To Mute Volume By Tapping The Back Of Your iPhone

      Benj Edwards is an Associate Editor for How-To Geek. For over 15 years, he has written about technology and tech history for sites such as The Atlantic, Fast Company, PCMag, PCWorld, Macworld, Ars Technica, and Wired. In 2005, he created Vintage Computing and Gaming, a blog devoted to tech history. He also created The Culture of Tech podcast and regularly contributes to the Retronauts retrogaming podcast. Read more…

      Need to quickly silence your phone? If youre running iOS 14 or later on an iPhone 8 or newer, you can mute the volume by tapping the back of your phone two or three times. This is possible thanks to a feature called Back Tap and a custom shortcut thats easy to create. Lets set it all up!

      Also Check: Undo Apple Notes

      How To Enable The Double Tap Period Shortcut On An iPhone

      This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow’s Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 15,754 times.

      This wikiHow teaches you to enable the period shortcut on your iPhone, allowing you to automatically enter a “.” by double tapping the space key while typing. Note, this setting is enabled by default.

      Ios 14 Magic Trick Lets You Tap The Back Of Your iPhone To Perform Actions

      How to Turn Off Double Tap Screenshot on iPhone

      How to turn off double tap on iphone ios 14. Settings > accessibility > touch > back tap > set double tap to screenshot this content could not be loaded the back tap feature alone in. Go to settings > accessibility > touch, and tap back tap. Go through the options on the touch screen and you will find a switch called tap to wake.

      Individuals with iphone x or higher can execute this action by pressing the side button and volume down button simultaneously. How to customize ios 14s back tap feature. Tap on either one to see options to enable for that number of taps.

      If you do not want to use the iphone back tap feature, you can turn it. back tap also works with. Then go to your settings.

      To turn on the feature make sure you’ve updated to ios 14. Swipe to the bottom and choose back tap. I show you how to enable the back tap feature that is new on the ios 14 compatible iphones.

      You can set actions for one of them or both. Scroll down and tap accessibility. Tap on < back< strong> tap< /strong> to go back, and set an action for triple tap as well.

      You’ll find back tap at the bottom. Double tap and triple tap. In such a case, you might want to turn off the double tap to screenshot option.

      Go to settings > accessibility. In order to enable back tap, the user needs to first go to settings, then to accessibility, touch, and finally back tap. Open the settings app on your iphone and tap on accessibility and then tap on touch.

      Also Check: How To Put iPhone 5 On Vibrate

      More articles

      Popular Articles